Cleaning kilns!

  I spent two interesting days at Jim Malone's pottery in North Cumbria cleaning his two chamber kiln in preparation for firing. You can find out more at Jim's site at http://www.jimmalonepottery.co.uk/kiln.htm.

Info taken from Site:

My kiln is an Oriental climbing kiln of two
chambers, This is the fourth I have built,
each kiln I have constructed has been
modified according to my experiences with
the preceding kilns, hopefully retaining the
virtues of the earlier one's whilst eliminating
some of the faults.
My latest kiln is fired using a combination
of oil and wood. The first chamber (around
50 cubic foot) is fired with two oil burners up
to 1000° C at which point I may finish off with
wood or oil (depends on the glazes) on
reaching cone 11 in chamber 1, chamber 2
is around 1000° C from the exhaust heat alone.
Chamber 2 is finished off with wood only.

Jim's Gallery

The yard

Barn at Jim's housing the kiln

Oriental climbing two chamber kiln

Kiln shelves in chamber

Close up of wall

Pointing first chamber 

The first step was to remove, clean and stack the kiln furniture and the next was to clean the loose mortar from the walls. I then had to fill all the deficits and repoint the walls. It was fun - and very hot!!

Pots outside the kiln

Chimney of kiln

The weather was fabulous - outside the kilns - but the bonus was coffee, tea and lunch times with Jim and his partner Janice in their lovely garden.

How lovely - a lot of hard work but it is a beautiful! 

I also got to look at Jim's studio and his latest work that he is preparing for Goldmark - 200 exhibition standard pots!

Wheel for turning

Jim's wheel 

Glazed and patterned bowls ready to fire

BIG vases

Beautiful bottles!

I hope to be able to get to Jim's for the firing and will - of course - blog! 

Ooooops!! Been AWOL!!!

How time does fly so much to blog about so little time to blog it! Where to start!

A quick summary:

Course modules this year started problematic and finished on a bit of a roll!

Surprisingly my research essay (Module AD210) was pretty well received - I will try to add it as a blog later - tried and couldn't get pics in.

Sadly, I didn't do as much as I had hoped for the practical but was quite pleased with what I did do and I passed and that is all that is required! The theme was the Male and Female Torso, I wanted to see how minimal a form I could create that would be recognised as male / female - well that's what the aim in the end was - I went through a very long journey to simplify the project to a manageable size.
I started with pieces hand modeled and hollowed.

Hand sculpted porcelain pieces - male and female

I then looked at thrown and altered creating a 'spine' and considered following the route of looking at the spine - an essential but neglected area of our body along with feet!

 I first created a healthy figure and then looked at the effect of deforming the spine

This started to get a bit complex when assistance came in the guise of Manga - I found a book in a wonderful bookshop in Bowness - OK I was slacking and had a wonderful week there in December with friends. It was freezing but sooooo lovely!

Cobwebs!!!

Walking down from Wansfell...

 to Windermere with amazing.... 

...cloud inversion.

 I digress ....... Manga.... there was the answer - very simple, basic body shapes from which my final pieces emerged.

Final pieces thrown and altered superwhite

Work placements were great and I will blog on the placement with Jim Robison and Christine Hester-Smith. Helped to build kiln at Ray Pearsons and helped Jim Malone clean up his kiln pre-firing. Adele Davison has a lovely blog on the kiln building with Ray (http://ambientceramics.blogspot.com/2011/03/salt-of-earth.html) - I will try to do one to complement hers.